Canon Printer Error 6000

Reasons of Getting Canon Printer Error 6000

  • Canon printer error 6000 is a difficulty that arises when your canon printer’s paper feeder tray hinders the printer from getting open if something is blocked. It can be anything, maybe dust particles or bits of paper.
  • The chances of happening canon mx922 support code 6000 are also increases when the paper tray is not installed into its place perfectly.
  • Furthermore, when you try to give various printer instructions at one go, this canon printer support code 6000 error can turn out.
  • Usually, when your canon printer is encompassed by many papers, This error can also crop up in your system.
  • Also, when the feed line is damaged or flattened out.
  • When an in-line feed or sensor part split has any fault, this error also appears.

Canon Printer Support Code 6000 Set Solutions

Process 1. Process For Cleaning Of Paper Feed Roller

Windows

  • You have to make sure that you enabled your printer at very first. If you find any file in the rear tray, then delete it from there.
  • Now, on printer properties, you need to open the dialogue. It can be vary depending upon the operating system of your device.
  • After this, first of all, hit the windows key and X key from your device’s keyboard.
  • Now, write down “Control Panel” and click on the search window’s Enter key.
  • After this, select “Printers and devices.”
  • As a result, your device will show a window of computers and printers.
  • You have to select “Print Preferences” from the list that appears right-clicking on the listing of your printer.
  • Now, for solving the canon printer error code 6000, you have to click on the tab that shows maintenance and next on the “Roller Cleaning” tab.
  • You have to verify the message then hit the tab that shows “Ok”.
  • This will rotates the roller of the paper feeder as it gets washed.
  • Next, ensure that the roller ends rotating on the paper feeder. Then place four or five plain paper sheets in A4 size on the rear tray at the arrival of the message. Here you need to put the density level of the paper.
  • Now, you have to confirm the displayed message and then pressed the “Ok” button.
  • This will enable the paper installed in the canon printer to feed and be discharged away from the printer. It is advised you make sure that no other processes will be performed during the purge of the roller of paper feed.
  • Ultimately, you have to confirm the displayed message and then pressed the “Ok” button.

What if you still face the error? Turn off the printer, unplug your printer’s power plug. Then from the right-hand side of the printer’s rear tray, you have to clean the paper feed roller with the damp cotton swab. Next, when you have done wiping it, get the roll to rotate manually. Make sure that you do not touch your fingertips on the printer’s paper feed roller, and spin it with the cotton swab.

Mac

  1. You have to make sure that you enabled your printer at very first. If you find any file in the rear tray, then delete it from there.
  2. Next, you have to open the output channel softly. This will open up the output channel extension.
  3. Now, later, initiate the Canon Printer IJ process.
  4. For doing this, Hit the “print and fax,” then open the “System Preferences”. After this, in the printer section, you need to select the name of your printer, then hit the “Open Print Queue”. It will appear product list, in which you have to pick the name of your printer and next hit the “keep” tab.
  5. You would now wipe the paper feed roller. For this, you have to make sure that you select cleaning from the pop-up menu. Hit the button that shows “Roller Cleaning”. Next, choose the source of the paper to clean. Hit the “Ok” tab. The paper feed roller will start rotating during cleaning.
  6. Next, ensure that the roller ends rotating on the paper feeder. Then place four or five plain paper sheets in A4 size on the rear tray at the arrival of the message. Here you need to put the density level of the paper.
  7. Now, you have to confirm the displayed message and then pressed the “Ok” button.
  8. This will enable the paper installed in the canon printer to feed and be discharged away from the printer. It is advised you make sure that no other processes will be performed during the purge of the roller of paper feed.
  9. Ultimately, you have to confirm the displayed message and then pressed the “Ok” button.

Process 2

If you see that the line feed is scraped or distorted, you just have to clean EJ or LF slit film with the help of non-corrosive liquid.

Process 3 

If you notice some dirt, particles, or unfamiliar objects caught into the LF drive, accurately remove the lodged object.

Process 4. Eliminating Paper Task Of The Print Queue

  • Now, hold the Windows key and R key of your keyboard as a whole.
  • Next, in the run box, type “services.msc”. Then hit the “Ok” tab.
  • This will appear service window on your device. Here, you need to scroll down until you find a print spooler. Now, you have to hit the stop “Stop” button by right-clicking the print spooler.
  • Again hit the windows keys and R key from your keyboard.
  • Afterward, type “spool” in the Run box and then hit the “Ok”.
  • Next, type “% systemroot% System32 Spool” Printers also click on the input key.
  • After this, pick all the files by clicking on the ctrl and A key on your keyboard.
  • Click on the “delete” key to get all the files to uninstall.
  • Now, after removing all the files you have to shut the spool folder.
  • Next, go back to the service window. And then, you have to right-click on the “Switch Printing” folder and hit the “Start” button.

Process 5

This is the 5th process to mend canon pixma support code 6000. Usually, the canon printer’s ability can be affected by a faulty part. Hence, to solve this problem, defective parts must be reinstated. The LF and EJ crevice film could be a faulty part of the canon printer. A roller feeder unit, timing sensor unit, and the logic board may also be involved.

Process 6. Reset The Printer System

  • Next, it is essential to isolate your canon printer from the power switch button. Then drop it in the equivalent brake mode for a rare second.
  • Also, reconnect the power cord of the printer, and reconnect it.
  • Then hold the Power button and press it for a few seconds. Then you will need to double-click on the Stop tab.
  • Then you will have to repeat this process once or twice.
  • After that, the Power button has to be issued very gradually this time.
  • Lastly, four times you should click on the Stop tab.

Process 7

If your printer is cluttered with documents, you make sure to leave free space in front of the tray before copying or printing. If the failure message arrives and there is something on the exterior of the box, remove it. Turn off the printer and later switch the printer off, and after on it, the printer will be ready to print.

Therefore, these are the whole steps to resolve the Canon printer error 6000 code.

Disclaimer

All the information is accessible on ijstartcannonx.com is directed to switch. So you should understand everything completely and take the step of your own free will. The facts comprise details regarding online policies and many more. The content which is shown on this webpage is related to another website that presents the most advanced information about Canon Printer Setup Guide or IJ Start Canon. Hence, ijstartcannonx.com is an autonomous third-party support provider that aims to resolve every technical issue or error similar to Canon printers. We utilize products, images, logos, and trademarks for informational objectives only. The information given on ijstartcannonx.com is subject to modification without prior notice concerning updates to the Ij Start Canon software. We are not a Canon Inc. Consequently, as you didn’t share your registered information with Canon Inc. among us. You may utilize all the contents that are present on the website to obtain information or during training goals. However, it will be entirely your own responsibility if you perform any operation on this website.